description the 18:88 and 88:88 0.56" four digit seven segment displays have surface painted in neutral gray and black for enhanced on/off contrast. all devices are available in either common anode or common cathode configuration with tinted green segments or untinted segments. features excellent appearance evenly illuminated segments gray face for optimum on/off contrast choice of colors: green choice of character size: 0.56 inch hdsp-b0xg 18:88 and 88:88 0.56" four digit gap green seven segment display data sheet
2 package dimensions 88:88 0.56" four digit display 7.80 (0.307) 10.00 19.10 (0.752) 12.7 x 3 = 38.10 (1.500) front side pin 1 2 ? ? 1.70 (0.067) 14.22 (0.560) 51.20 (2.016) 8.00 (0.315) 4.00 (0.157) 2.54 x 6 = 15.24 (0.600) 0.50 (0.020) 15.24 (0.600) right side bottom side aaa ddd c f e f e f e b c b c b c ggg dp3 dp2 6.00 (0.236) ++ + + pin 7 pin 12 pin 8 7.00 (0.276) digit 2 digit 3 digit 4 digit 1 a f e b g d note: all dimensions are in millimeters (inches). unless otherwise stated, tolerances are ?0.25 mm.
3 package dimensions 18:88 0.56" four digit display pin configuration function pin hdsp-b01g/b03g/b05g/b07g/b09g hdsp-b02g/b04g/b06g/b08g/b10g 1 anode e cathode e 2 anode d cathode d 3 anode dp cathode dp 4 anode c cathode c 5 anode g cathode g 6 digit 4 common cathode digit 4 common anode 7 anode b cathode b 8 digit 3 common cathode digit 3 common anode 9 digit 2 common cathode digit 2 common anode 10 anode f cathode f 11 anode a cathode a 12 digit 1 common cathode digit 1 common anode 7.80 (0.307) 10.00 19.10 (0.752) 12.7 x 3 = 38.10 (1.500) front side pin 1 2 ? 1.70 (0.067) 14.22 (0.560) 51.20 (2.016) 8.00 (0.315) 4.00 (0.157) 2.54 x 6 = 15.24 (0.600) 0.50 (0.020) 15.24 (0.600) right side bottom side aaa ddd b c f e f e f e b c b c b c ggg dp3 dp2 6.00 (0.236) ++ + + pin 7 pin 12 pin 8 7.00 (0.276) digit 2 digit 3 digit 4 digit 1 note: all dimensions are in millimeters (inches). unless otherwise stated, tolerances are 0.25 mm.
4 internal circuit diagram hdsp-b01g and hdsp-b05g (common cathode) hdsp-b02g and hdsp-b06g (common anode) digit 1 12 digit 2 9 digit 3 8 digit 4 6 a 11 b 7 c 4 d 2 e 1 f 10 g 5 dp 3 bc digit 1 12 digit 2 9 digit 3 8 digit 4 6 a 11 b 7 c 4 d 2 e 1 f 10 g 5 dp 3 bc
5 internal circuit diagram hdsp-b03g, hdsp-b07g, and hdsp-b09g (common cathode) hdsp-b04g, hdsp-b08g, and HDSP-B10G (common anode) digit 1 12 digit 2 9 digit 3 8 digit 4 6 a 11 b 7 c 4 d 2 e 1 f 10 g 5 dp 3 digit 1 12 digit 2 9 digit 3 8 digit 4 6 a 11 b 7 c 4 d 2 e 1 f 10 g 5 dp 3
6 devices hdsp- description b01g 88:88 0.56" green 4 digit, tinted green, common cathode, display 18:88, gray color surface b02g 88:88 0.56" green 4 digit, tinted green, common anode, display 18:88, gray color surface b03g 88:88 0.56" green 4 digit, tinted green, common cathode, display 88:88, gray color surface b04g 88:88 0.56" green 4 digit, tinted green, common anode, display 88:88, gray color surface b05g 88:88 0.56" green 4 digit, untinted, common cathode, display 18:88, gray color surface b06g 88:88 0.56" green 4 digit, untinted, common anode, display 18:88, gray color surface b07g 88:88 0.56" green 4 digit, untinted, common cathode, display 88:88, gray color surface b08g 88:88 0.56" green 4 digit, untinted, common anode, display 88:88, gray color surface b09g 88:88 0.56" green 4 digit, untinted, common cathode, display 88:88, black color surface b10g 88:88 0.56" green 4 digit, untinted, common anode, display 88:88, black color surface part numbering system notes: 1. for codes not listed in the figure above, please refer to the respective datasheet or contact your nearest avago representative for details. 2. bin options refer to shippable bins for a part number. color and intensity bins are typically restricted to 1 bin per tube (exceptions may apply). please refer to respective datasheet for specific bin limit information. 5082 -x x x x-x x x x x hdsp-x x x x-x x x x x mechanical options [1] 00: no mechanical option color bin options [1,2] 0: no color bin limitation maximum intensity bin [1,2] 0: no maximum intensity bin limitation minimum intensity bin [1,2] 0: no minimum intensity bin limitation device configuration/color [1] g: green device specific configuration [1] refer to respective datasheet package [1] refer to respective datasheet
7 electrical/optical characteristics at t a = 25?c device series hdsp- parameter symbol min. typ. max. units test conditions luminous intensity/segment i v 2000 3200 cd i f = 10 ma (digit average) 3200 4500 all devices forward voltage/segment or dp v f 1.80 2.20 2.60 v i f = 20 ma peak wavelength peak 568 nm i f = 20 ma dominant wavelength d 573 nm i f = 20 ma luminous intensity i v-m 2:1 i f = 10 ma matching ratio reverse current i r 100 av r = 5 v notes: 1. typical specification for reference only. do not exceed absolute maximum ratings. 2. the dominant wavelength, d , is derived from the cie chromaticity diagram and is that single wavelength which defines the color of the device. absolute maximum ratings description green units average power per segment or dp 65 mw peak forward current per segment or dp 100 ma dc forward current per segment or dp 25 ma operating temperature range ?0 to +105 ?c storage temperature range ?0 to +105 ?c reverse voltage per segment or dp 5 v wavesoldering temperature for 3 seconds 2 mm below body 250 ?c note: 1. derate above 40?c at 0.33 ma/?c for green. b01g, b02g, b03g, b04g b05g, b06g, b07g, b08g, b09g, b10g intensity bin limits ( cd at 10 ma) device series hdsp- b01g, b02g, b03g, b04g b05g, b06g, b07g, b08g, b09g, b10g bin name min. [1] max. [1] min. [1] max. [1] k 2000 3200 na na l 3200 5050 3200 5050 m na na 5050 8000 note: 1. tolerance for each bin limit is 10%. color categories (tolerance 1 nm) rank symbol hue range unit 2 2 573.5?76.5 nm 3 3 570.5?73.5 nm
contrast enhancement for information on contrast enhancement, please see application note 1015. soldering/cleaning cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning led parts. all these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic led parts. figure 1. maximum allowable dc current vs. ambient temperature. figure 2. forward current vs. forward voltage. figure 3. relative luminous intensity vs. dc forward current. figure 4. relative efficiency (luminous intensity per unit current) vs. peak current. i dc maximum dc current per segment ma 20 0 t a ambient temperature c 30 90 120 40 30 70 50 green 10 20 5 15 25 35 40 60 80 100 110 r j-a = 770 c/w i f forward current per segment ma 0 0 v f forward voltage v 100 50 35 70 20 14 30 green 2 80 10 40 60 90 relative luminous intensity (normalized to 1 at 10 ma for green) 0 0 i f dc forward current ma 8 6 4 2 20 10 30 green 51525 relative efficiency (normalized to 1 at 10 ma) 1.4 0 0 5 10 15 20 25 30 35 40 45 50 peak forward current per segment ma 0.2 0.4 0.6 0.8 1.0 1.2 for product information and a complete list of distributors, please go to our website: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies limited in the united states and other countries . data subject to change. copyright ? 2006 avago technologies limited. all rights reserved. obsoletes 5988-7859en av01-0698en december 11, 2006
|
